458
ACP Measurement
Trace/Detector
Trace/Detector
Accesses a menu of functions that enable you to control the detectors for the current measurement.
Select Trace (Front-panel Only)

This key selects which trace the other parameters under the Trace/Detector menu will apply to.

Trac e Typ e

Allows you to select the type of trace for the current measurement. The first page of this menu contains a

selection of the trace type (Clear Write, Trace Average, Max Hold, Min Hold) for the selected trace.

Key Path Front-panel key
Initial S/W Revision Prior to A.02.00
Key Path Trace/Detector
Notes Front panel only.
Couplings When Meas Method is RBW or FAST, Select Trace is disabled.
Preset 1
State Saved Saved in instrument state.
Range 1 | 2 | 3
Initial S/W Revision Prior to A.02.00
Key Path Trace/Detector
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :TRACe[1]|2|3:ACPower:TYPE
WRITe|AVERage|MAXHold|MINHold
:TRACe[1]|2|3:ACPower:TYPE?
Example TRAC:ACP:TYPE MINH
TRAC:ACP:TYPE?
Notes WRITe = Clear Write
AVERage = Average
MAXHold = Maximum Hold
MINHold = Minimum Hold