Agilent Technologies U9072A cdma-2000

1061

Meas Setup

Amplitude

Lets you edit the Amplitude of the current row.

Insert Point Below

Pressing this key inserts a point below the current point. The new point is a copy of the current point and

becomes the current point. The new point is not yet entered into the underlying table, and the data in the

row is displayed in light gray.

Delete Point

This is an immediate action key. It will immediately delete the currently-selected point, whether or not

that point is being edited, and select Navigate. The point following the currently-selected point (or the

point preceding if there is none) is selected.

Copy from Limit

Copies an existing limit into the current limit, including all secondary parameters (Description,

Associated Trace, Type, Margin, Interpolation, Relative to CF/RL).

Build from Trace

Builds a limit using an existing trace. This command will overwrite all data in the limit. Since a straight

copy would typically have hundreds or thousands of segments, the data is approximated to better

represent a limit line; small excursions whose width is less than 10 trace buckets will sometimes not be

captured. Secondary parameters which are not associated with traces (Description, Associated Trace,

Key Path Meas Setup, Limits, Edit

Notes There is no value readback on the key

Min –1000 dBm

Max 1000 dBm

Initial S/W Revision A.02.00

Key Path Meas Setup, Limits, Edit

Initial S/W Revision A.02.00

Key Path Meas Setup, Limits, Edit

Initial S/W Revision A.02.00

Remote Command: :CALCulate:LLINe[1]|2|3|4|5|6:COPY

Example: :CALC:LLINE2:COPY LLINE1 copies the data from line 1 into line 2.

Notes: Auto return to the Edit menu.

Initial S/W Revision: A.02.00