745
Modulation Accuracy (Composite Rho)
Meas Setup
Meas Setup
Displays the measurement setup menu for the currently selected measurement.
Avg Number
Sets the number of data acquisitions that will be averaged. After the specified number of average counts
is reached, the averaging mode (termination control) setting determines the averaging action.
Avg Mode
Selects the type of termination control used for the averaging function. This determines the averaging
action after the specified number of data acquisitions (average count) is reached. You can select between
the Exp (exponential) and Repeat averaging modes. This selection only affects the averaging result after
the number of N averages is reached. You can use the Avg Number key to set N.
Key Path Front panel key
Mode cdma2000
Remote Command [:SENSe]:RHO:AVERage:COUNt <integer>
[:SENSe]:RHO:AVERage:COUNt?
[:SENSe]:RHO:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:RHO:AVERage[:STATe]?
Example RHO:AVER:COUN 100
RHO:AVER:COUN?
RHO:AVER OFF
RHO:AVER?
Remote Command Notes You must be in the cdma2000 mode to use this command. Use
INSTrument:SELect to set the mode.
Preset 10
ON
State Saved Saved in instrument state.
Min 1
Max 10000
Key Path Meas Setup