1286
Sweep/Control
Gate View Start Time Controls the time at the left edge of the Gate View. Gate Delay Controls the length of time from the time the gate condition goes True until the gate is turned on.
Preset: 519.3 µs
WiMAX OFDMA: 5 ms
GSM/EDGE: 1 ms
State Saved: Saved in instrument state
Min: 1 µs
Max: 6000 s
Initial S/W Revision: Prior to A.02.00
Key Path: Sweep/Control, Gate, Gate View Setup
Remote Command: [:SENSe]:SWEep:EGATe:VIEW:STARt <time>
[:SENSe]:SWEep:EGATe:VIEW:STARt?
Example: SWE:EGAT:VIEW:STAR 10ms
Notes: Units of time are required or no units; otherwise an invalid suffix error
message will be generated. See error –131.
Preset: 0 ms
State Saved: Saved in instrument state
Min: 0
Max: 500 ms
Initial S/W Revision: A.10.00
Key Path: Sweep/Control, Gate
Remote Command: [:SENSe]:SWEep:EGATe:DELay <time>
[:SENSe]:SWEep:EGATe:DELay?
Example: SWE:EGAT:DELay 500ms
SWE:EGAT:DELay?
Notes: Units of time are required or no units; otherwise an invalid suffix error
message will be generated.