773
Modulation Accuracy (Composite Rho)
View/Display
View Selection by number (Remote Command only)
Displays the numeric values of the measurement results.
View Settings
Accesses the menu that enables control of view settings for the current active display.
I/Q Polar View
Turns the display graticule On and Off.
I/Q Polar Vec/ConstIn
Specifies the format of the Polar Vector graph display. You can select one of the following formats:
Vec Constln (Vector and Constellation)
Vector (Vector only)
Remote Command :DISPlay:RHO:VIEW[:SELect] POLar|ERRor|TPHase
:DISPlay:RHO:VIEW[:SELect]?
Example DISP:RHO:VIEW:SEL POL
DISP:RHO:VIEW:SEL?
Dependencies/Couplings TPHase (3) is available only if Multi Channel Estimator is On.
Preset POLar
State Saved Saved in instrument state.
Range Polar Graph | I/Q Error | Power, Timing and Phase
Mode cdma2000
Remote Command :DISPlay:RHO:VIEW:NSELect <integer>
:DISPlay:RHO:VIEW:NSELect?
Example DISP:RHO:VIEW:NSEL 1
DISP:RHO:VIEW:NSEL?
Remote Command Notes You must be in cdma2000 mode to use this command. Use
INSTrument:SELect to set the mode.
Preset 1
State Saved Saved in instrument state.
Min 1
Max 3
Key Path View/Display