1344
Trigge r
RF Trigger SourceThe RF Trigger Source command selects the trigger to be used for the specified measurement when RF is the selected input. The RF trigger source can be queried and changed even while another input is selected, but it is inactive until RF becomes the selected input.Note the inclusion of the <measurement> parameter in the command below. Because each measurement remembers its own Trigger Source, the command must be qualified with the measurement name. Note that for the Swept SA measurement this is not the case; for backwards compatibility, no <measurement> parameter is used when setting the Trigger Source for the Swept SA measurement.
List Power
Step WCDMA,
EDGE/GSM IMM IQ not
supported
Transmit
On/Off
Power
LTET DD LTET DD:
BTS: External 1
MS: Periodic
Timer
LTET DD:
BTS:
External 1
MS: Periodic
Timer
Transmit
Analysis BLUETOOTH RFB IQ not
supported
Adjacent
Channel
Power
BLUETOOTH IMM IQ not
supported
LE In-band
Emissions BLUETOOTH IMM IQ not
supported
EDR
In-band
Spurious
Emissions
BLUETOOTH Periodic Timer IQ not
supported
Conformanc
e EVM LTE, LTETDD,
MSR IMM IMM
Remote Command: :TRIGger:<measurement>[:SEQuence]:RF:SOURce
EXTernal1|EXTernal2|IMMediate|LINE|FRAMe|RFBurst|VIDeo|
IF|ALARm|LAN|TV
:TRIGger:<measurement>[:SEQuence]:RF:SOURce?
Example: TRIG:ACP:RF:SOUR EXT1
Selects the external 1 trigger input for the ACP measurement and the RF input
TRIG:RF:SOUR VID
Selects video triggering for the SANalyzer measurement and the RF input.
For SAN, do not use the <measurement> keyword.
Meas Mode Preset for RF Preset for IQ Notes