950
Input/Output
RFIO1
The RF port that will be used for the current output
RFIO2
The RF port that will be used for the current output
Multiport Adapter
The Multiport Adapter key allows you to set the multiport adapter unit which is connected to the EXT by
USB for download of calibration data and additional control.
Multiport Adapter is only available in the EXT (E6607A/B/C), and is blanked for other models.
EXT (E6607A/B)
The Multiport Adapter key will not be displayed if the multiport adapter unit is not connected to the EXT
by USB.
EXT (E6607C)
The MPA is integrated into the instrument; therefore, the Multiport Adapter key is always displayed.
See “More Information” on page 951
ReadBack: RF Output
Initial S/W Revision: A.05.01
Key Path: Input/Output, RF Output & Test Set Config, RF Output
Example: :FEED:RF:PORT:OUTP RFIO1
Dependencies: Only available in EXT.
ReadBack: RFIO1
Initial S/W Revision: A.05.01
Key Path: Input/Output, RF Output & Test Set Config, RF Output
Example: :FEED:RF:PORT:OUTP RFIO2
Dependencies: Only available in EXT.
ReadBack: RFIO2
Initial S/W Revision: A.05.01
Key Path: Input/Output, RF Output & Test Set Config