496
Spectrum Emission Mask Measurement
Marker
Marker
Accesses a menu that enables you to select, set up and control the markers for the current measurement.
If there are no active markers, Marker selects marker 1, sets it to Normal and places it at the center of the
display. You can turn on and control up to 12 markers.
Select Marker
Displays 12 markers available for selection.
Marker Type
Sets the marker control mode to Normal and Off. If the selected marker is Off, pressing Marker sets it to
Normal and places it at the center of the screen on the trace determined by the Marker Trace rules. At the
same time, Marker X Axis Value appears on the Active Function area. The marker X axis value entered
in the active function area will display the marker value to its full entered precision. If the current control
mode for the measurement is Off, there is no active function and the active function is turned off.
Key Path: Front-panel key
Initial S/W Revision: Prior to A.02.00
Key Path: Marker
Initial S/W Revision: Prior to A.02.00
Key Path: Marker
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
WLAN
Remote Command: :CALCulate:SEMask:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:MO
DE POSition|OFF
:CALCulate:SEMask:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:MO
DE?
Example: CALC:SEM:MARK:MODE POS
CALC:SEM:MARK:MODE?
Notes: If the selected marker is Off, pressing Marker sets it to Normal and places it at
the center of the screen on the trace determined by the Marker Trace rules. At
the same time, Marker X Axis Value appears on the Active Function area.
Default Active Function: the active function for the selected marker’s current
control mode. Note that if the current control mode is Off, there is no active
function and the active function is turned off.
Active Function Display: the marker X axis value entered in the active
function area will display the marker value to its full entered precision.