1114
Peak Search
the peak criteria. They are listed in the current sort order.
If the peak threshold is defined and turned on, then the peaks must meet this peak criteria in addition to
the display line requirements.
See “More Information” on page 1114.
More Information
If the Display Line (see the Section “View/Display”) is turned on, the Peak Table can be selected to
include all peaks, only those above the Display Line, or only those below the Display Line. See Figures
1–2 and 1–3 to understand what happens if both Display Line and Pk Threshold are turned on.
Figure 1- 2Above Display Line Peak Identification
Key Path Peak Search, Peak Table
Remote Command :CALCulate:MARKer:PEAK:TABLe:READout
ALL|GTDLine|LTDLine
:CALCulate:MARKer:PEAK:TABLe:READout?
Example CALC:MARK:PEAK:TABL:READ GTDL
Dependencies Turning Display Line off forces Readout to ALL
Preset All
Preset All
State Saved Saved in instrument state.
Readback line 1-of-N selection
Initial S/W Revision Prior to A.02.00
Display Line ThresholdDisplay Line
peak listed peak not listed
Threshold
peak listed peak not listed
pk_abovedl.vsd