705
Code Domain
SPAN X Scale
I/Q Error View EVM Window X Scale/DivSets the horizontal scale by changing a symbol value per division in the EVM window of the I/Q Error
view.
Remote Command :DISPlay:CDPower:VIEW3:WINDow2:TRACe:X[:SCALe]:PDI
Vision <real>
:DISPlay:CDPower:VIEW3:WINDow2:TRACe:X[:SCALe]:PDI
Vision?
Example DISP:CDP:VIEW3:WIND2:TRAC:X:PDIV 1.0
DISP:CDP:VIEW3:WIND2:TRAC:X:PDIV?
Restriction and Notes If the Auto Scaling is set to On, this value is automatically determined
by the measurement result. When you set this value manually, Auto
Scaling automatically changes to Off.
Target window to control depends on the SubOpCode.
Default value is Device sensitive as follows:
BTS: 2.3
MS: 4.7
Dependencies/Couplings See Restriction and Notes
Remote Command Notes Target window to control depends on the SubOpCode.
Preset 2.3|4.7
State Saved Saved in instrument state.
Min 0.1
Max 500000.0
Key Path Span X Scale
Mode cdma2000
Remote Command :DISPlay:CDPower:VIEW3:WINDow3:TRACe:X[:SCALe]:PDI
Vision <real>
:DISPlay:CDPower:VIEW3:WINDow3:TRACe:X[:SCALe]:PDI
Vision?
Example DISP:CDP:VIEW3:WIND3:TRAC:X:PDIV 1.0
DISP:CDP:VIEW3:WIND3:TRAC:X:PDIV?