205
System Functions
Save
To File . . .
When you press “To File”, the analyzer brings up a Windows dialog and a menu entitled “Save As.”
This menu allows you to navigate to the various fields in the Windows dialog without using a keyboard
or mouse. The Tab and Arrow keys can also be used for dialog navigation.
The
Listed below are the functions of the various fields in the dialog, and the corresponding softkeys:
Save
Performs the save to the specified file of the selected type. If the file already exists, a dialog will appear
that allows you to replace the existing file by selecting OK, or you can Cancel the request. If you select
Notes: Both single and double quotes are supported for any filename parameter over
remote.
After saving to a register, that register’s menu key is updated with the date the
time, unless a custom label has been entered for that key.
After saving to a register, you remain in the Save State menu, so that you can
see the Register key update. After saving to a file, the analyzer automatically
returns to the previous menu and any Save As dialog goes away.
Backwards Compatibility SCPI: :MMEMory:STORe:STATe 1,<filename>
For backwards compatibility, the above syntax is supported. The "1" is
simply ignored. The command is sequential.
Initial S/W Revision: Prior to A.02.00