407
ACP Measurement
Meas Setup
Ref Car FreqSets the reference carrier frequency.
Dependencies If there is only one carrier, this key will be grayed out.
Couplings If you enter a carrier value that is currently configured as having no power
present, that carrier will be changed to having power present.
If you enter a ref carrier this parameter will be set to manual.
Preset Auto determined
State Saved Saved in instrument state.
Min 1
Max Number of available carriers
Backwards Compatibility SCPI [:SENSe]:MCPower:RCARrier[1]|2 (PSA Power Suite)
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path Meas Setup, Carrier Setup
Mode WCDMA, C2K, WIMAX OFDMA, 1xEVDO, TD-SCDMA, LTE, LTETDD
Remote Command [:SENSe]:ACPower:CARRier[1]|2:RCFRequency <freq>
[:SENSe]:ACPower:CARRier[1]|2:RCFRequency?
[:SENSe]:ACPower:CARRier[1]|2:RCFRequency:AUTO
OFF|ON|0|1
[:SENSe]:ACPower:CARRier[1]|2:RCFRequency:AUTO?
Example ACP:CARR:RCFR 250 MHz
ACP:CARR:RCFR?
ACP:CARR:RCFR:AUTO OFF
ACP:CARR:RCFR:AUTO?
Notes Carrier sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.