1194
Source (Internal)
Edit Selected Sequence
Allows access to the sub-menus for editing the sequence currently selected within the Waveform Sequence List
view. Pressing this key changes the central view area to display the Waveform Sequence Creation and Editing view.
Notes: Error Checks for Query SCPI command: (Continued)
If the specified waveform sequence file name suffix is not “.seq”, error is
generated.
If you use an unsupported MSUS (that is, not NVWFM), or have an error in
the waveform segment file path, an error is generated.
If the first specified waveform file cannot be found, an error is generated.
If you nest one waveform sequence file into another waveform sequence file,
an error is generated.
If the specified repetition value is larger than 65535 or smaller than 1, an error
is generated.
If the specified marker type is unrecognized, an error is generated.
For Query SCPI
For the Query the parameters are:
<filename> - String type.
This variable specifies the path and name of the waveform sequence file being
queried. The path supports MSUS (NVWFM) or a real full path
representation. See example.
The return value is a <string>, which includes each waveform segment file
name, repetitions, and marker type. For example:
SOUR:RAD:ARB:SEQ? “NVWFM:testSeq1.seq”,
<“wfmSegment1. wfm, 10, ALL, wfmSegment2.wfm, 20, M1M3”,
Error Checks for Query SCPI command:
If you do not specify a filename, an error is generated.
If the waveform sequence file name is empty, an error is generated.
If the specified waveform sequence file cannot be found, an error is generated.
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Waveform Sequences
Notes: No remote command, front panel only.
Initial S/W Revision: A.05.00