459
ACP Measurement
Trace/Detector
Couplings When Detector setting is “Auto” ([:SENSe]:ACPower:DETector:AUTO?),
Detector is set to what the Radio Standard defaults states (see detector section
below) for all conditions of Trace Type and for all traces. When set to Manual,
all Traces use the same detector type. When Average State = Off then Trace
Types AVERage, MaxHold and MinHold will not function, since Averaging is
required to be ‘on’ for them to operate.
When Meas Method is RBW or FAST, Trace Type is disabled.
Preset AVERage
State Saved Saved in instrument state.
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00