628
Occupied Bandwidth Measurement
Save
File ID string, which is “MeasResult”
Measurement ID following Mode ID, which is “SA:OBW” for example.
Firmware rev and model number
Option string
Auto Sweep Time Rules
Average Mode
Average Number
Average State
Center Frequency
Detector
IFGain
IFGainAuto
Internal Preamp
Internal Preamp Band
Limit
Limit State
Max Hold
OBW Percent Pwr
Resolution Band Width
Resolution Bandwidth Shape
Span
Sweep Points
Sweep Time
Sweep Time Auto
TriggerSource
Video Bandwidth
x DB
The data above is followed in the file by a line containing “MeasResult1” and “MeasResult2”. This line
forms a header for each set of measurement results, which appear in subsequent lines. Each line of
Measurement Results consists of two comma-separated values, for MeasResult1 and MeasResult2
respectively.
The MeasResult1 set in the file corresponds to the data returned by MEAS|READ|FETCh:OBWidth1,
and the MeasResult2 set corresponds to the data returned by MEAS|READ|FETCh:OBWidth2.