971
Input/Output
RFIO4
The port to which the current corrections are applied. Pressing this key again allows the user access to the menu for
specifying to which internal device and multiport adapter RF path the corrections for multiport adapter RFIO 4 are
applied.
Correct Source
Sets the corrections for the multiport adapter RFIO 4 port to be applied to the source.
Correct Analyzer
Sets the corrections for the multiport adapter RFIO 4 port to be applied to the analyzer.
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO3
BOTH
Readback: "Correct Source and Analyzer"
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port
Remote Command: [:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO4 SOURce |ANALyzer |BOTH
[:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO4?
Example: :MPAD:CORR:CSET:RF:PORT:RFIO4 BOTH
Preset: Both
State Saved: Saved in State
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, RFIO 4
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO4
SOUR
Readback: "Correct Source"
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, RFIO 4
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO4
ANAL
Readback: "Correct Analyzer"
Initial S/W Revision: A.10.0