836
QPSK EVM Measurement
View/Display
View/Display
Accesses a menu of functions that enable you to set up and control the display parameters for the current
measurement.
Two views are available in this measurement, as described in the sections:
“I/Q Measured Polar Graph” on page 837
“I/Q Error View” on page 844
This topic contains the following sections:
“View Selection by name (Remote Command Only)” on page 836
“View Selection by number (Remote Command Only)” on page 836
View Selection by name (Remote Command Only)
Selects the format for the measurement results view.
View Selection by number (Remote Command Only)
Displays the numeric values of the measurement results.
Remote Command :DISPlay:EVMQpsk:VIEW[:SELect] POLar|ERRor
:DISPlay:EVMQpsk:VIEW[:SELect]?
Example DISP:EVMQ:VIEW ERR
DISP:EVMQ:VIEW?
Mode WCDMA, C2K, 1xEVDO
Couplings Changing parameter of "ViewNum" (:DISPlay:EVMQpsk:VIEW:NSELect)
also changes this parameter.
Preset POLar
State Saved Saved in instrument state.
Range I/Q Measured Polar Vector|I/Q Error
Instrument S/W Revision Prior to A.02.00
Remote Command :DISPlay:EVMQpsk:VIEW:NSELect <integer>
:DISPlay:EVMQpsk:VIEW:NSELect?
Example DISP:EVMQ:VIEW:NSEL 2
DISP:EVMQ:VIEW:NSEL?
Mode WCDMA, C2K, 1xEVDO