1180
Source (Internal)
ARB SetupAllows access to the ARB setup sub-menus.Sample Rate
Allows you to set the ARB waveform playback sample rate.
Run-Time Scaling
Allows you to adjust the run-time scaling value. The run-time scaling value is applied in real-time while the
waveform is playing.
Notes: The return data is in the following format:
<integer> - memory used
<integer> - memory free
<integer> - file count in ARB memory
<string>,<string>, … <string> - comma separated string list of waveform
segments within ARB memory
Example: SOUR:RAD:ARB:FCAT?
EXT returns: 27499,2069653,3,”c2k.wfm”,”gsm.wfm”,”wcdma.wfm”
Initial S/W Revision: A.09.00
Key Path: Source, Modulation Setup, ARB
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, ARB Setup
Remote Command: :SOURce:RADio:ARB:SCLock:RATE <freq>
:SOURce:RADio:ARB:SCLock:RATE?
Example: SOUR:RAD:ARB:SCL:RATE 48.00 MHz
Dependencies: When a new waveform is selected for playback the settings contained within
the associated waveform header file are applied to the ARB. The sample rate
is one of the values stored within the header file. If the newly selected
waveform file has an associated header file, the sample rate is updated with
the value from the header file. The sample rate will remain unchanged if the
newly selected waveform does not have an associated header file.
Preset: 125.00 MHz
Min: 1.00 kHz
Max: 125.00 MHz
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, ARB Setup