Agilent Technologies U9072A cdma-2000 Sets the marker X position in trace points. It has no effect if the control mode is Off.

608
Occupied Bandwidth Measurement
Marker
Marker X Axis Position (Remote Command Only)
Sets the marker X position in trace points. It has no effect if the control mode is Off.
Marker Y Axis Value (Remote Command Only)
Returns the marker Y Axis value in the current marker Y Axis unit.
Modified at S/W Revision: A.03.00
Key Path: SCPI only
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: :CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:X
:POSition <real>
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:X
:POSition?
Example: CALC:OBW:MARK10:X:POS 0
CALC:OBW:MARK10:X:POS?
Notes: The query returns the marker’s absolute X Axis value in trace points if the
control mode is Normal, or the offset from the marker’s reference marker in
trace points if the control mode is Delta.
Preset: After a preset, all markers are turned OFF, so Marker X Axis Value query
returns a not a number (NAN).
State Saved: No
Min: –9.9E+37
Max: 9.9E+37
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00
Key Path: SCPI only
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: :CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:Y
?
Example: CALC:OBW:MARK11:Y?
Preset: Result dependent on Markers setup and signal source.
State Saved: No
Min: –9.9E+37