340
Channel Power Measurement
Meas Setup
Method

Turns the Root Raised Cosine (RRC) filter On or Off. The α value (roll off) for the filter is set to the

value of the Filter Alpha parameter, and the RRC filter bandwidth is set to the Filter BW parameter.

Integ BW

See “Method” on page 340for details.

Preset: OFF
State Saved: Saved in instrument state.
Range: Low Gain|High Gain
Initial S/W Revision: Prior to A.02.00
Key Path: Meas Setup
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEV DO, LTE, LTETDD, WLAN
Remote Command: [:SENSe]:CHPower:FILTer[:RRC][:STATe] OFF|ON|0|1
[:SENSe]:CHPower:FILTer[:RRC][:STATe]?
Example: CHP:FILT OFF
CHP:FILT?
Notes: This parameter is no rmally used when TETRA is selected as the Radio Std.
You must be in the W-CDMA mode, cdma2000 mode, LTD mode, LTE TDD
mode, WLAN mode, 1xEVDO mode, or WIMAX OFDMA mode to use this
command. Use :INSTrument:SELect to set the mode.
Dependencies: For CDMA2K mode, this key is blank.
For 1xEVDO mode, this key is blank.
For WLAN 802.11 ac (80 + 80 MHz ), RRC Weighted is not supported .
Preset: OFF
State Saved: Saved in instrument state.
Range: Integ BW|RRC Weighted
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00, A.10.00
Key Path: Meas Setup
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.02.00, A.03.00, A.10.00