843
QPSK EVM Measurement
View/Display
InterpolationToggles the interpolation function from On to Off. If set to On, the vector lines between chip dots are converted into smooth curves by the interpolation function.+45° RotationToggles the state of the rotation of the I/Q polar trace. If set to On, the I/Q polar trace is rotated by 45 degrees to provide a rectangular display.
Preset C2K: 512
WCDMA: 2560
1xEVDO: 2560
State Saved Saved in instrument state.
Min 1
Max WCDMA: 5120
C2K:1536
Instrument S/W Revision Prior to A.02.00
Remote Command :DISPlay:EVMQpsk:VIEW[1]:WINDow2:TRACe:INTPolation[:STA
Te] OFF|ON|0|1
:DISPlay:EVMQpsk:VIEW[1]:WINDow2:TRACe:INTPolation[:STA
Te]?
Example DISP:EVMQ:VIEW:WIND2:TRAC:INTP ON
DISP:EVMQ:VIEW:WIND2:TRAC:INTP?
Key Path View/Display, Display
Mode WCDMA, C2K, 1xEVDO
Notes If set to ON, the vector lines between chip dots are converted into smoothened
curves by the interpolation function.
Preset OFF
State Saved Saved in instrument state.
Range On|Off
Instrument S/W Revision Prior to A.02.00
Remote Command :DISPlay:EVMQpsk:VIEW[1]:WINDow2:TRACe:ROTQpi[:STATe]
OFF|ON|0|1
:DISPlay:EVMQpsk:VIEW[1]:WINDow2:TRACe:ROTQpi[:STATe]?
Example DISP:EVMQ:VIEW:WIND2:TRAC:ROTQ ON
DISP:EVMQ:VIEW:WIND2:TRAC:ROTQ?