435
ACP Measurement
Meas Setup
Meas Type
Changes the reference used for the measurement. This allows you to make absolute and relative power measurements of either total power or the power normalized to the measurement bandwidth.Total Pwr Ref (TPR) sets the reference to the total carrier power. PSD Ref (PSDR) sets the reference to the power spectral density of the carrier.PSD RefSets the unit bandwidth for Power Spectral Density. The available units are dBm/Hz and dBm/MHz.
Readback Text IBW|Filtered IBW|RBW|Fast
Backwards Compatibility SCPI [:SENSe]:ACPR:SWEep:TYPE
[:SENSe]:MCPower:METHod (PSA Power Suite)
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path Meas Setup
Mode WCDMA, C2K, 1xEVDO, LTE
Remote Command [:SENSe]:ACPower:TYPE TPRef|PSDRef
[:SENSe]:ACPower:TYPE?
Example ACP:TYPE PSDR
ACP:TYPE?
Initial S/W Revision Prior to A.02.00
Notes You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Preset TPRef
State Saved Saved in instrument state.
Range Total Power Ref|PSD Ref
Modified at S/W Revision A.02.00
Modified at S/W Revision A.03.00
Key Path Meas Setup
Mode WCDMA, C2K, 1xEVDO, LTE
Remote Command :UNIT:ACPower:POWer:PSD DBMHZ|DBMMHZ
:UNIT:ACPower:POWer:PSD?