Agilent Technologies U9072A cdma-2000 Reference value.

409

ACP Measurement

Meas Setup

Reference” value.PSDSets the power spectral density in the carrier (main channel) that is used to compute the relative power spectral density values for the offsets when Meas Type is set to PSD Ref. When the PSD Ref state is set to Auto, this will be set to the measured carrier power spectral density.

Key Path Meas Setup, Carrier Setup, Power Ref

Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, LTE, LTETDD

Remote Command [:SENSe]:ACPower:CARRier[1]|2[:POWer] <real>

[:SENSe]:ACPower:CARRier[1]|2[:POWer]?

[:SENSe]:ACPower:CARRier[1]|2:AUTO[:STATe] OFF|ON|0|1

[:SENSe]:ACPower:CARRier[1]|2:AUTO[:STATe]?

Example ACP:CARR 10

ACP:CARR?

ACP:CARR:AUTO OFF

ACP:CARR:AUTO?

Notes Although the default value is defined, the value is recalculated by the

measurement result just after measurement.

Carrier sub op code. 1 for BTS, 2 for MS. Default is BTS.

You must be in the mode that includes ACP measurements to use this

command. Use :INSTrument:SELect to set the mode.

Dependencies This key is available only when the Meas Type is TPRef. If the Meas Type is

not TPRef, this key is grayed out.

Preset 0.0

State Saved Saved in instrument state.

Min –200 dBm

Max 200 dBm

Backwards Compatibility SCPI [:SENSe]:MCPower:CARRier[1]|2[:POWer]

Initial S/W Revision Prior to A.02.00

Modified at S/W Revision A.02.00, A.03.00, A.04.00

Key Path Meas Setup, Carrier Setup, Power Ref

Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, LTE, LTETDD