1154
Source (Internal)
None
Selects no radio standard for use. When you have selected the radio standard to NONE, you cannot use channel
numbers to set frequency automatically. You will need to set the frequency manually.
GSM/EDGE
Sets GSM/EDGE as the radio standard for use and accesses the GSM/EDGE specific channel band sub-menus.
P-GSM
Selects P-GSM as the active channel band.
E-GSM
Selects E-GSM as the active channel band.
Remote Command: :SOURce:FREQuency:CHANnels:BAND
NONE|PGSM|EGSM|RGSM|DCS1800|PCS1900|TGSM810|GSM450|GSM4
80|GSM700|GSM850|BANDI|BANDII|BANDIII|BANDIV|BANDV|BAND
VI|BANDVII|BANDVIII|BANDIX|BANDX|BANDXI|BANDXII|BANDXII
I|BANDXIV|USCELL|USPCS|JAPAN|KOREAN|NMT|IMT2K|UPPER|SEC
OND|PAMR400|PAMR800|IMTEXT|PCS1DOT9G|AWS|US2DOT5G|PUBLI
C|LOWER|BAND1|BAND2|BAND3|BAND4|BAND5|BAND6|BAND7|BAND8
|BAND10|BAND11|BAND12|BAND13|BAND14|BAND17|BAND18|BAND1
9|BAND20|BAND21|BAND24|BAND25|BAND33|BAND34|BAND35|BAND
36|BAND37|BAND38|BAND39|BAND40|BAND41|BAND42|BAND43|BAN
DA|BANDB|BANDC|BANDD|BANDE|BANDF
:SOURce:FREQuency:CHANnels:BAND?
Example: SOUR:FREQ:CHAN:BAND PGSM
Notes: Set this setting to “NONE” will grey out “Channel” on page 1143 Channel
Initial S/W Revision: A.05.00
Key Path: Source, Frequency, Radio Setup, Radio Standard
Initial S/W Revision: A.05.00
Key Path: Source, Frequency, Radio Setup, Radio Standard
Initial S/W Revision: A.05.00
Key Path: Source, Frequency, Radio Setup, Radio Standard, GSM/EDGE
Example: SOUR:FREQ:CHAN:BAND PGSM
Initial S/W Revision: A.05.00
Key Path: Source, Frequency, Radio Setup, Radio Standard, GSM/EDGE
Example: SOUR:FREQ:CHAN:BAND EGSM