339
Channel Power Measurement
Meas Setup
the following conditions:• The input attenuator is set to 0 dB• The preamp is turned On and the frequency range is under 3.6 GHzFor other settings, Auto sets the IF Gain to Low Gain.
IF Gain State
Selects the range of the IF Gain.
Key Path: Meas Setup, IF Gain
Remote Command: [:SENSe]:CHPower:IF:GAIN:AUTO[:STATe] ON|OFF|1|0
[:SENSe]:CHPower:IF:GAIN:AUTO[:STATe]?
Example: CHP:IF:GAIN:AUTO ON
CHP:IF:GAIN:AUTO?
Couplings: When the auto attenuation exists (for example, with an electrical attenuator),
IF Gain State differs depending on the condition.
Auto sets IF Gain to High Gain under any of the following conditions:
The input attenuator is set to 0 dB, or the preamp is turned on and the
frequency range is under 3.6 GHz. For other conditions, Auto sets IF Gain to
Low Gain.
Preset: OFF
State Saved: Saved in instrument state.
Range: Off|On
Initial S/W Revision: Prior to A.02.00
Key Path: Meas Setup, IF Gain
Remote Command: [:SENSe]:CHPower:IF:GAIN[:STATe] ON|OFF|1|0
[:SENSe]:CHPower:IF:GAIN[:STATe]?
Example: CHP:IF:GAIN ON
CHP:IF:GAIN?
Notes: ON = high gain
OFF = low gain
Couplings: When the auto attenuation exists (for example, with an electrical attenuator),
IF Gain State differs depending on the condition.
Auto sets IF Gain to High Gain under any of the following conditions:
The input attenuator is set to 0 dB, or the preamp is turned on and the
frequency range is under 3.6 GHz. For other conditions, Auto sets IF Gain to
Low Gain.