700
Code Domain
SPAN X Scale
Stop Code Number

Sets the stop value of the code range for the code domain power graph (CDP) and CDE graph.

X Ref Value

Controls the reference value of the X scale of the current measurement.

I/Q Error View Mag Error Window X Ref Value

Sets the symbol reference value on the horizontal axis in the magnitude error window of the I/Q Error

view.
Remote Command :DISPlay:CDPower:CDOMain:SPAN:STOP <integer>
:DISPlay:CDPower:CDOMain:SPAN:STOP?
Example DISP:CDP:CDOM:SPAN:STOP 127
DISP:CDP:CDOM:SPAN:STOP?
Restriction and Notes Default value is sensitive to the Base Code Length. If Base Code
Length is set 64, the default value is 63. If Base Code Length is set 128,
the default value is 127.
For MS mode, there are 32 codes in all. This key is grayed out.
Dependencies/Couplings 1.6.2.1.1 Start Code Number and 1.6.2.1.2 Stop Code Number are
coupled to each other, according to:
(A) Stop Code Number > Start Code Number
and
(B) Stop Code Number – Start Code Number >= 63
When changing the stop code number, if it does not satisfy the above,
the start code number is changed to satisfy (A) and (C).
(C) Stop Code Number – Start Code Number = 63;
Preset 63
State Saved Saved in instrument state.
Min 63
Max 127
Key Path Span X Scale
Key Path Span X Scale
Mode cdma2000