1028
Marker To
Mkr->CF Step
Sets the center frequency (CF) step size of the test set to the marker frequency, or in a delta-marker
mode, to the frequency difference between the delta and reference markers.
If the currently selected marker is not on when this key is pressed, it is turned on at the center of the
screen as a normal type marker.
Mkr->Start
Changes the start frequency to the frequency of the selected marker. The marker stays at this frequency,
so it moves to the left edge of the display. In delta marker mode, this function sets the start frequency to
the x-axis value of the delta marker.
If the currently selected marker is not on when this key is pressed, it is turned on at the center of the
screen as a normal type marker.
Key Path Marker ->
Remote Command :CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12[:SET]:STE
P
Example CALC:MARK1:STEP sets the CF step to the value (or delta value) of marker
1.
Notes Sending this command selects the subopcoded marker
If specified marker is off, this command will turn it on at the center of the
screen as a normal type marker.
Dependencies This function is not available (key is grayed out) when x-axis is the time
domain
Couplings All the usual couplings associated with setting CF Step apply (see the
Frequency Section).
Initial S/W Revision Prior to A.02.00
Key Path Marker ->
Remote Command :CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12[:SET]:STA
Rt
Example CALC:MARK1:STAR sets the start frequency to the value (or delta value) of
marker 1.
Notes Sending this command selects the subopcoded marker
If specified marker is off, this command will turn it on at the center of the
screen as a normal type marker.
Dependencies This function is not available (key is grayed out) when x-axis is the time
domain
Couplings All the usual couplings associated with setting Start Frequency apply (see the
Frequency Section).