1215
Source (Internal)
Bus Trigger Command (Remote Command Only)
Used to initiate an immediate trigger event if the trigger source is set to Bus.
AM
Allows access to the menu for configuring the Amplitude Modulation.
AM
Enables or disables the amplitude modulation.
Turning AM on when another modulation format is already on results in the previous modulation format
being turned off and the generation of an error.
AM Depth
Allows you to set the amplitude modulation depth in percent.
Remote Command: :SOURce:RADio:ARB:TRIGger:INITiate
Example: SOUR:RAD:ARB:TRIG:INIT
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, AM
Remote Command: :SOURce:AM:STATe
:SOURce:AM:STATe?
Example: SOUR:AM:STAT OFF
Preset: Off
Range: On | Off
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, AM
Remote Command: :SOURce:AM[:DEPTh][:LINear]
:SOURce:AM[:DEPTh][:LINear]?
Example: SOUR:AM 0.1
Preset: 0.1 %
Min: 0.1 %
Max: 95.0 %
Initial S/W Revision: A.05.00