762
Modulation Accuracy (Composite Rho)
SPAN X Scale
Scale/Div
Sets the horizontal scale by changing a chip value per division. When the Scale Coupling default setting
On is active, the displayed plots use a Scale/Div value determined by the test set, which is based on the
measurement result.
I/Q Error View - EVM Window
Sets the horizontal scale by changing a chip value per division in the EVM window.
I/Q Error View - Mag Error Window
Sets the horizontal scale by changing a chip value per division in the magnitude error window.
Min 0.0
Max 5000000.0
Key Path Span X Scale
Key Path Span X Scale
Mode cdma2000
Remote Command :DISPlay:RHO:VIEW2:WINDow[1]:TRACe:X[:SCALe]:PDIVi
sion <real>
:DISPlay:RHO:VIEW2:WINDow[1]:TRACe:X[:SCALe]:PDIVi
sion?
Example DISP:RHO:VIEW2:WIND:TRAC:X:PDIV 100.0
DISP:RHO:VIEW2:WIND:TRAC:X:PDIV?
Restriction and Notes If Auto Scaling is set to On, this value is automatically determined by
the measurement result. When you set this value manually, Auto
Scaling is automatically set to Off.
Dependencies/Couplings See Restriction and Notes
Remote Command Notes WINDow1: EVM window on I/Q Error view
Preset 153.6
State Saved Saved in instrument state.
Min 1.0
Max 500000.0
Key Path Span X Scale
Mode cdma2000