Agilent Technologies U9072A cdma-2000 - page 957

957
Input/Output
RFIO4
Turn on or off the multiport adapter RFIO4 output port.
RFIO5
Turn on or off the multiport adapter RFIO5 output port.
RFIO6
Turn on or off the multiport adapter RFIO6 output port.
RFIO7
Turn on or off the multiport adapter RFIO7 output port.
Preamp On/Off
Turn on or off the preamplifier of the multiport adapter input path. It will provide one fix gain for the
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter, Output Port
Preset: Not affected by a Preset. Set to OFF by pressing System > Restore Defaults >
Input/Output Settings or System > Restore Defaults > All.
State Saved: Saved in instrument state.
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter, Output Port
Preset: Not affected by a Preset. Set to OFF by pressing System > Restore Defaults >
Input/Output Settings or System > Restore Defaults > All.
State Saved: Saved in instrument state.
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter, Output
Port, Page 2
Preset: Not affected by a Preset. Set to OFF by pressing System > Restore Defaults >
Input/Output Settings or System > Restore Defaults > All.
State Saved: Saved in instrument state.
Initial S/W Revision: A.10.0
Key Path: Input/Output, RF Output & Test Set Config, Multiport Adapter, Output
Port, Page 2
Preset: Not affected by a Preset. Set to OFF by pressing System > Restore Defaults >
Input/Output Settings or System > Restore Defaults > All.
State Saved: Saved in instrument state.
Initial S/W Revision: A.10.0