638
Occupied Bandwidth Measurement
Sweep/Control
Pause
Pauses the measurement after the current data acquisition is complete.
When Paused, the label on the key changes to Resume. Pressing Resume resumes the measurement at
the point where it had been paused.
See “Pause/Resume” on page 1279 for more information.
Gate
Accesses a menu that enables you to control the gating function.
The Gate functionality is used to view signals best viewed by qualifying them with other events.
This function is not available when the selected input is I/Q.
See “Gate ” on page 1280 for more information.
Points
Sets the number of points per sweep. The resolution of setting the sweep time depends on the number of
points selected. The current value of points is displayed parenthetically, next to the sweep time in the
lower-right corner of the display.
Preset: NORMal
State Saved: Saved in instrument state.
Range: Norm | Accy
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00
Key Path: Sweep/Control
Initial S/W Revision: Prior to A.02.00
Key Path: Sweep/Control
Initial S/W Revision: Prior to A.02.00
Key Path: Sweep/Control
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO , LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: [:SENSe]:OBWidth:SWEep:POINts <integer>
[:SENSe]:OBWidth:SWEep:POINts?