686
Code Domain
Meas Setup
Walsh Code Number

Specifies the Walsh code number.

I/Q Branch (MS only)

Select the I phase or Q phase for the demodulation axis.

Remote Command Notes You must be in the cdma2000 mode to use this command. Use
INSTrument:SELect to set the mode.
Preset 64|32
State Saved Saved in instrument state.
Min 4|2
Max 128|32
Key Path Meas Setup
Mode cdma2000
Remote Command :CALCulate:CDPower:WCODe[:NUMBer] <integer>
:CALCulate:CDPower:WCODe[:NUMBer]?
Example CALCulate:CDPower:WCODe 1
CALCulate:CDPower:WCODe?
Restriction and Notes Set the Walsh code number depending on the channel type.
Dependencies/Couplings Walsh Code Number must be smaller than Walsh Code Length
Remote Command Notes You must be in the cdma2000 mode to use this command.
Preset 0
State Saved Saved in instrument state.
Min 0
Max Walsh Code Length – 1
Key Path Meas Setup
Mode cdma2000
Remote Command :CALCulate:CDPower:AXIS[:MS] IPH|QPH|IQCombined
:CALCulate:CDPower:AXIS[:MS]?
Example CALC:CDP:AXIS IPH
CALC:CDP:AXIS?