681
Code Domain
Marker
Marker Trace
Assigns the specified marker to the designated trace.
Couple Marker
Toggles the state of the markers to be coupled On or Off. When this function is true (On), moving any
marker causes an equal X-axis movement of every other marker except those located to the polar trace,
and Chip value of the marker located to the polar trace, which is not Off, including Fixed markers.
“Equal X Axis movement” refers to the difference between each marker’s X Axis value (in the
fundamental x-axis units of the trace that marker is on) and the X Axis value of the marker being moved
(in the same fundamental x-axis units). This may result in markers going off screen
See Couple Marker in the "Marker" section for more information.
Mode cdma2000
Remote Command :CALCulate:CDPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|1
2:TRACe CDPower|EVM|MERRor|PERRor|SPOWer|CPOWer|
CDError|POLar
:CALCulate:CDPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|1
2:TRACe?
Example CALC:CDP:MARK:TRACE POL
CALC:CDP:MARK:TRACE?
Preset CDPower
State Saved Saved in instrument state.
Range Code Domain Power| Code Domain Error|Symbol Power|Chip
Power|EVM|Phase Error|Mag Error|Polar
Key Path Marker, Properties
Mode cdma2000
Remote Command :CALCulate:CDPower:MARKer:COUPle[:STATe] ON|OFF|1|0
:CALCulate:CDPower:MARKer:COUPle[:STATe]?
Example CALC:CDP:MARK:COUP ON
CALC:CDP:MARK:COUP?
Preset OFF
State Saved Saved in instrument state.
Range On|Off
Key Path Marker