467
ACP Measurement
View/Display

bandwidth used is the displayed value, which is (1 + alpha)/T where T = 1/(Offset Integ Bw).

Display

Accesses a menu of functions that enable you to set the display parameters.

See “Display” on page 1393 for more information.

Bar Graph

Turns the Bar Graph On and Off.

Key Path Front-panel key
Initial S/W Revision Prior to A.02.00
Key Path View/Display
Initial S/W Revision Prior to A.02.00
Key Path View/Display
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command :DISPlay:ACPower:VIEW[1]:WINDow[1]:BGRaph OFF|ON|0|1
:DISPlay:ACPower:VIEW[1]:WINDow[1]:BGRaph?
Example DISP:ACP:VIEW:WIND:BGR OFF
DISP:ACP:VIEW:WIND:BGR?
Notes You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Dependencies When the method is RBW, this key is always set to On and grayed out.
Preset ON
State Saved Saved in instrument state.
Range On|Off
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00