ADTRAN 1000R Series spanning-tree port-priority <priority level>

Command Reference Guide Port Channel Interface Config Command Set

spanning-tree port-priority <priority level>

Use the spanning-tree port-priority command to select the priority level of this interface. To return to the

default setting, use the no version of this command.

Syntax Description

<priority level> Specifies a value from 0 to 240 (this value must be in increments of 16).

Default Values

By default, this set to 128.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

The only time that this priority level is used is when two interfaces with a path to the root have equal cost.

At that point, the level set in this command will determine which port the spanning-tree will use. Set the

priority value lower to increase the chance the interface will be used.

Usage Examples

The following example sets the interface to a priority of 96:

(config)#interface port-channel 4

(config-p-chan 4)#spanning-tree port-priority 96