ADTRAN 1000R Series qos map <mapname> <sequence number>

Command Reference Guide Global Configuration Mode Command Set

qos map <mapname> <sequence number>

Use the qos map command to activ ate the QoS Map Command Set (wh ich allows you to create and/o r edit

a QoS map). For details on specific commands, refe r to the section Quality of Service (QoS) Map

Commands on page 1345. Use the no form of this command to delete a map entry.

Syntax Description

<mapname> Specifies the QoS map name.

<sequence number> Specifie s a number (va lid range: 0 to 65,535) to dif fer entia te this QoS map and to

assign matc h or de r.

Default Values

No default value is necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 6.1 Command was introduced.

Functional Notes

A QoS policy is defined using a QoS map. The QoS map is a named list with sequenced entries. An entry

contains a single match reference and one or more actions (

priority

set

, or

both

). Multiple map entries for the

same QoS map are differentiated by a sequence number. The sequence number is used to assign match order.

Once created, a QoS map must be applied to an inter face (using the qos-polic y ou t <map-name>

command) in order to actively process traffic. Any traffic for the interface that is not sent to the priority

queue is sent using the defa ult queuing method for the interface (such as weighted fair queuing).