ADTRAN 1000R Series debug auto-config

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 98
debug auto-config
Use the debug auto-config command to activate debug messages associated auto-config events. Debug
messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of this command to
disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The example activates debug messages associated with auto-config e vents:
>enable
#debug auto-config