ADTRAN 1000R Series vlan <vlan id> media [ethernet]

Command Reference Guide VLAN Database Configuration Command Set

vlan <vlan id> media [ethernet]

Use the vlan media command to set the VLAN media type. Use the no form of this command to reset to

the default.

Syntax Description

<vlan id> Specifies a valid VLAN interface ID (1 to 4094).

ethernet Sets the VLAN media type. Th e only media type currently supported is Ethernet.

Default Values

By default, vlan media is set to ethernet.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example sets the media type of VLAN 2 to ethernet:

(config)#vlan database

(vlan)#vlan 2 media ethernet