ADTRAN 1000R Series loopback network

Command Reference Guide SHDSL Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 692
loopback network
Use the loopback network command to initiate a loopback test on the SHDSL interface, looping the data
toward the network. Use the no form of this command to deactivate the loopback.
Syntax Description
No subcommands.
Default Values
No default necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example initiates a loopback on the SHDSL interface:
(config)#interface shdsl 1/1
(config-shdsl 1/1)#loopback network