ADTRAN 1000R Series oam-pvc managed <frequency>

Command Reference Guide ATM Sub-Interfa c e Config Command Set

oam-pvc managed <frequency>

Use the oam-pvc managed command to enable end-to-end F5 Operation, Administration, and

Maintenance (OAM) loopback cell generation and OAM management for an ATM interface. Use the no

form of this command to disable generation of OAM loopback cells.

Syntax Description>

<frequency> Specifies the time delay between transmitting OAM loopback cells. The range is

from 0 to 600 seconds.

Default Values

By default, the frequency is 1 second.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example enables OAM loopback cell generation with a frequency of 5 seconds:

(config)#interface atm 1.1

(config-atm 1.1)#oam-pvc managed 5