ADTRAN 1000R Series show qos [cos-map | dscp-cos | interface <interface id> | queuing]

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 272
show qos [cos-map | dscp-cos | interface <interface id> | queuing]
Use the show qos command to display information regarding quality of service (QoS) and cost of service
(CoS) settings.
Syntax Description
cos-map Displays the CoS priority-to-queue map. The map outlines which CoS priority is
associated with which queue.
dscp-cos Displays the Differentiated Services Code Point (DSCP) to CoS map settings.
interface
<interface id> Displays the QoS settings on a specific interface (Ethernet, Gigabit Ethernet, or
Port Channel).
queuing Displays the type of queuing being used. If weighted round robin (WRR) queuing
is enabled, the command also displays the weight of each queue.
Default Values
No default s necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 6.1 Command was introduced.
Release 7.1 Command was expanded to include the dscp-cos option.