ADTRAN 1000R Series ip forward-protocol udp <port number>

Command Reference Guide Global Configuration Mode Command Set

ip forward-protocol udp <port number>

Use the ip forward-protocol udp command to specify the protocols and ports the AOS allows when

forwarding broadca st packets. Use the no form of this command to disable a specified protocol or port

from being forwarded.

Default Values

By default, the AOS

forwards broadcast packets for all protocols and ports.

The ip helper command must be used in conjunction with the ip forward-protocol

command to configure the AOS to forward UDP broadcast packets.

Syntax Description

Specifies the UDP traffic type (using source port)

The following is the list of UDP port numbers that may be identified using the

text name:

biff (Port 512) pim-auto-rp (Port 496)

bootps(Port 67) rip (Port 520)

discard (Port 9) snmp (Port 161)

dnsix (Port 195) snmptrap (Port 162)

domain (Port 53) sunrpc (Port 111)

echo (Port 7) syslog (Port 514)

isakmp (Port 500) tacacs (Port 49)

mobileip (Port 434) talk (Port 517)

nameserver (Port 42) tftp (Port 69)

netbios-dgm (Port 138) time (Port 37)

netbios-ns (Port 137) who (Port 513)

netbios-ss (Port 139) xdmcp (Port 177)

ntp (Port 123)

Alternately, the <port number> may be specified using the following syntax:

<0-65535>. S pecifies the port number used by UDP to pass information to upper

layers. All ports below 1024 are considered well-known ports and are controlled

by the Internet Assigned Numbers Authority (IANA). All ports above 1024 are

dynamically assigned ports that include registered ports for vendor-specific

applications.