ADTRAN 1000R Series ppp chap hostname <hostname>

Command Reference Guide Demand Interface Configuration Command Set

ppp chap hostname <hostname>

Use the ppp chap hostname command to configure an alternate hostname for CHAP PPP authentication.

Use the no form of this command to remove a configured hostname. For more information on PAP and

CHAP functionality, refer to the Technology Review section for the command ppp authentication [chap |

eap | pap] on page 831.

Syntax Description

<hostname> Specifies a hostname using an alphanumeric string up to 80 characters in length.

Default Values

By default, there are no configured PPP CHAP hostnames.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 1.1 Command was introduced.

Release 11.1 Command expanded to include the demand interface.

Usage Examples

The following example specifies a PPP CHAP hostname of my_host:

(config)#interface demand 1

(config-demand 1)#ppp chap hostname my_host