ADTRAN 1000R Series mac-address <address>

Command Reference Guide Ethernet Interface Configuration Command Set

mac-address <address>

Use the mac-address command to specify the Media Access Control (MAC) address of the unit. Only the

last three values of the MAC address can be modified. The first three values contai n the ADTRAN

reserved number (00:0A:C8) by default. Use the no form of this command to return to the default MAC

address programmed by ADTRAN.

Syntax Description

<address> Specifies a MAC address entered in a series of six dual-digit hexade cimal values

separated by colons (for example 00:0A:C8 :5 F :0 0: D2 ).

Default Values

A unique default MAC addre ss is programmed in each unit shipped by ADTRAN.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Release 5.1 Command was expanded to include Gigabit Ethernet interfaces.

Usage Examples

The following example configu res a MAC address of 00:0A:C8:5F:00:D2:

(config)#interface ethernet 0/1

(config-eth 0/1)#mac-address 00:0A:C8:5F:00:D2