ADTRAN 1000R Series debug gvrp interface <interface> [bpdus

Command Reference Guide Enable Mode Command Set

debug gvrp interface <interface> [bpdus | vlans]

Use the debug gvrp interface command to see GARP VLAN Registration Protocol (GVRP) debug

messages related to a particular interface. De bug messages are displayed (real time) on the terminal (or

Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

<interface> Activates debug messages for the specified interface. Type debug gv rp

interface ? for a complete list of applicable interfaces.

bpdus Displays debug messages showing all GVRP configuration messages sent and

received on the interface.

vlans Displays debug messages showing all GVRP-related VL AN changes occurring on

the interface.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example displays debug messages showing GVRP configuration messages sent and

received on Ethernet interface 0/24:

>enable

#debug gvrp interface ethernet 0/24 bpdus

2000.07.31 23:15:51 GVRP BPDUS.eth 0/24: TX = (Len:2 LeaveAll) (Len:4 JoinIn Vlan:1) (End) ... SENT

2000.07.31 23 :1 5: 52 GVRP BPDUS.eth 0/24: RX = (Len:4 Empty Vlan:2) (Len:4 JoinIn Vlan:20) (end)

2000.07.31 23:15:52 GVRP BPDUS.eth 0/24: TX = (Len:4 JoinIn Vlan:1) (End) ... SENT

2000.07.31 23 :1 5: 52 GVRP BPDUS.eth 0/24: RX = (Len:4 JoinIn Vlan:20) (end)

2000.07.31 23:16:00 GVRP BPDUS.eth 0/24: RX = (Len:2 LeaveAll) (end)