ADTRAN 1000R Series spanning-tree priority <value>

Command Reference Guide Global Configuration Mode Command Set

spanning-tree priority <value>

Use the spanning-tree priority command to set the priority for spanning-tree interfaces. The lowe r the

priority value, the higher the likelihood the configured spanning-tree interface will be the root for the

bridge group. To return to the default bridge priority value, use the no version of this command.

Syntax Description

<value> Sets a priority value for the bridge interface. Configuring this value to a low

number increases the interface’s chance of being the root. Therefore, the

maximum priority level would be 0. Range: 0 to 65,535.

Default Values

By default, the priority level is set to 32768.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example sets spanning-tr ee priority to the maximum level:

(config)#spanning-tree priority 0