Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 164
show buffers users [realtime]
Use the show buffers users command to display a list of the top users of packet buffers. Typically, this
command will only be used as a debug tool by ADTRAN personnel.
Syntax Description
realtime Displays full-screen output in real time. See the Functional Notes below for more
information.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 4.1 Command was introduced.
Release 10.1 The real time display option was introduced.
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously update d on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of dat a displayed,
increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page
318).
Usage Examples
The following is a sample from the show buffers users command:
>enable
#show buffers users
Number of users: 7
Rank User Count
1 0x0052f4f8 59
2 0x0051a4fc 32
3 0x00528564 8
4 0x0053c1c8 7
5 fixedsize 5