ADTRAN 1000R Series

Command Reference Guide Global Configuration Mode Command Set

The following is the list of TCP port numbers that may be identified using the text

name (in bold):

bgp (Port 179) lpd (Port 515)

chargen (Port 19) nntp (Port 119)

cmd (Port 514) pim-auto-rp (Port 496)

daytime (Port 13) pop2 (Port 109)

discard (Port 9) pop3 (Port 110)

domain (Port 53) smtp (Port 25)

echo (Port 7) sunrpc (Port 111)

exec (Port 512) syslog (Port 514)

finger (Port 79) tacacs (Port 49)

ftp (Port 21) talk (Port 517)

gopher (Port 70) tftp (Port 69)

hostname (Port 101) telnet (Port 23)

ident (Port 113) time (Port 37)

irc (Port 194) uucp (Port 540)

klogin (Port 543) whois (Port 43)

kshell (Port 544) www (Port 80)

<destination ip> Specifies the destination IP ad dr es s use d fo r packet match i ng .

IP addresses can be ex pr es se d in on e of thre e wa ys:

1. Using the keyword any to match any IP address. For example, entering deny

any will effectively shut down the interface that uses the access list because all

traffic will match the any keyword.

2. Using the host <A.B.C.D> to specify a single host address. For example,

entering permit host 196.173.22.253 will allow all traffic from the host with an

IP address of 196.173.22.253.

3. Using the <A.B.C.D> <wildcard> format to match all IP ad dresse s in a “range.”

Wildcard masks work in reverse logic from subnet mask. Specifying a one in

the wildcard mask equates to a “don’t care.” For example, entering permit

192.168.0.0 0.0.0.255 will permit all traffic from the 192.168.0.0/24 network.

<destination port> Optional. Specifies the destination port. Only valid when <protocol> is tcp or udp

(Refer to previously listed <source port> for more details).

<icmp-type> Optional. Filters packets using ICMP defined (and numbered) messages carried

in IP datagrams (used to send error and control information). Valid range is

0 to 255.