ADTRAN 1000R Series show vlan [brief | brief realtime | id <vlan id> | name <vlan name>

Command Reference Guide Enable Mode Command Set

show vlan [brief | brief realtime | id <vlan id> | name <vlan name> |

Use the show vlan command to display current virtual local area network (VLAN) information.

Syntax Description

brief Optional.

Shows an abbreviated version of the VLAN information (brief description).

brief realtime Displays full-screen output in real time. See the Functional Notes below for more

information.

<vlan id> Optional. Shows information regarding a specific VLAN, specified by a VLAN interface

ID (valid range: 1

4094).

name

<vlan name> Optional. Shows information regarding a specific VLAN, specified by a VLAN interface

name (up to 32 characters).

realtime Displays full-screen output in real time. See the Functional Notes below for more

information.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.

Command History

Release 5.1 Command was introduced.

Release 10.1 The real time display option was introduced.

Function Notes

Use the realtime argument for this command to display full-screen output in real time. Information is

continuously update d on the console until you either freeze the data (by pressing the F key) or exit

realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the

information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,

increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page

318).