Command Reference Guide Route Map Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1353

ROUTE MAP COMMAND SET

To activate the Route Map Interface Configuration mode, enter the route-map command at the Glob al
Configuration mode prompt. For example:
>enable
#
configure terminal
(config)#
route-map MyMap permit 100
The following comm a nd s are com mo n to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
do on page 32
exit on page 34
All other commands for this command set are described in this section in alphabetical order.
match as-path <name> on page 1354
match community <name> [exact-matc h] on page 1355
match ip address <access list name> on page 1356
match ip address prefix-list <prefix-list name> on page 1357
match metric <value> on page 1358
set as-path prepend [<number> | last-as <number>] on page 1359
set comm-list <name> delete on page 1360
set local-preference <value> on page 1361
set metric <value> on page 1362